diff --git a/Docs/src/library.but b/Docs/src/library.but index 97c61bf8..7d3b8e94 100644 --- a/Docs/src/library.but +++ b/Docs/src/library.but @@ -1,302 +1,277 @@ -\A{library} DLL/TLB Library Setup - - -\H{library_intro} Introduction - -NSIS 2.01 features a new system for the installation and uninstallation of dynamic link libraries (DLL) and type libraries (TLB). -Using this new system you can handle the complete setup with one single line of code: - -\b File copying - -\b File copying on reboot - -\b Version checks - -\b Registration and unregistration - -\b Registration and unregistration on reboot - -\b Shared DLL counting - -\b Windows File Protection checks - -The macros are stored in the header file Library.nsh, which should be included in scripts using this system: - -\c !include Library.nsh - -Note that the library macros are limited on non-Windows platforms. DLL version information is required when compiling on non-Windows platforms. - - -\H{library_install} Library Installation - -\S1{} Introduction - -The InstallLib macro allows you to install a library. It sets the error flag if something went wrong during library setup. - -To ask the user for a reboot, if required, use the Modern UI with a Finish page or use \R{ifrebootflag}{IfRebootFlag} and make your own page or message box. - -\S1{} Parameters - -\c libtype shared install localfile destfile tempbasedir - -\\libtype\\ - -The type of the library - -DLL - Dynamic link library (DLL)\\ -REGDLL - DLL that has to be registered\\ -TLB - Type library or DLL that contains a type LIBRARY\\ -REGDLLTLB - DLL that has to be registered and contains a type library\\ - - -\\shared\\ - -Specify whether the library is shared with other applications - -NOTSHARED - The library is not shared\\ -$VARNAME - Variable that is empty when the application is installed for the first time, - which is when the shared library count will be increased.\\ - -\\install\\ - -Specify the installation method - -REBOOT_PROTECTED - -\b Upgrade the library on reboot when in use (required for system files). - -\b Upgrade the library if the file is not protected by Windows File Protection. - -NOREBOOT_PROTECTED - -\b Warns the user when the library is in use. The user will have to close applications using the library. - -\b Upgrade the library if the file is not protected by Windows File Protection. - -REBOOT_NOTPROTECTED - -\b Upgrade the library on reboot when in use (required for system files). - -\b Upgrade the library without checking for Windows File Protection. - -NOREBOOT_NOTPROTECTED - -\b Warns the user when the library is in use. The user will have to close applications using the library. - -\b Upgrade the library without checking for Windows File Protection. - -\\localfile\\ - -Location of the library on the compiler system - -\\destfile\\ - -Location to store the library on the user's system - -\\tempbasedir\\ - -Directory on the user's system to store a temporary file when the system has to be rebooted. - -For Windows 9x/ME support, this directory should be on the same volume as the destination file (destfile). -The Windows temp directory could be located on any volume, so you cannot use this directory. - -\S1{} Options - -\R{define}{Define} any of the following before inserting the InstallLib macro to modify its behavior as specified. - -\S2{} LIBRARY_X64 - -\b Installs a DLL built for Windows x64. - -\b \\Warning:\\ this resets file system redirection. - -\S2{} LIBRARY_SHELL_EXTENSION - -\b Define this before inserting InstallLib macro to call SHChangeNotify with SHCNE_ASSOCCHANGED after registration. - -\b Use this to refresh the shell when installing a shell extension or when changing file associations. - -\S2{} LIBRARY_COM - -\b Define this before inserting InstallLib macro to call CoFreeUnusedLibraries after registration. - -\b Use this for unloading all unnecessary libraries from memory when installing COM libraries. - -\S2{} LIBRARY_IGNORE_VERSION - -\b Define this before inserting InstallLib macro to ignore version information in the file and always install it, even if it already exists. - -\b Use this when an older or specific version is required. - -\b Not recommended for DLLs installed to $SYSDIR. - -\S1{} Notes - -\b If you want to support Windows 9x/ME, you can only use short filenames (8.3). - -\b \\Warning:\\ when deploying DLLs, always use redistributable files. Never copy files from your system directory. - -\S1{} Example - -\S2{} Unshared DLL - -\c !insertmacro InstallLib REGDLL NOTSHARED REBOOT_NOTPROTECTED dllname.dll $SYSDIR\dllname.dll $SYSDIR - -\S2{} Shared DLL - -\c ;Add code here that sets $ALREADY_INSTALLED to a non-zero value if the application is -\c ;already installed. For example: -\c -\c IfFileExists "$INSTDIR\MyApp.exe" 0 new_installation ;Replace MyApp.exe with your application filename -\c StrCpy $ALREADY_INSTALLED 1 -\c new_installation: -\c -\c !insertmacro InstallLib REGDLL $ALREADY_INSTALLED REBOOT_NOTPROTECTED dllname.dll $SYSDIR\dllname.dll $SYSDIR - -\H{library_uninstall} Library Uninstallation - -\S1{} Introduction - -The UnInstallLib macro allows you to uninstall a library. It sets the error flag if something went wrong during library removal. - -\S1{} Parameters - -\c libtype shared uninstall file - -\\libtype\\ - -The type of the library - -DLL - Dynamic link library (DLL)\\ -REGDLL - DLL that has to be registered\\ -TLB - Type library or DLL that contains a type LIBRARY\\ -REGDLLTLB - DLL that has to be registered and contains a type library\\ - - -\\shared\\ - -Specify whether the library is shared with other applications - -NOTSHARED - The library is not shared\\ -SHARED - The library is shared and should be removed if the shared library count - indicates that the file is not in use anymore..\\ - -\\uninstall\\ - -Specify the uninstallation method - -NOREMOVE - -\b The library should not be removed. You should use this option for common or important -system files such as the Visual Basic/C++/MFC runtimes. - -REBOOT_PROTECTED - -\b Remove the library on reboot when in use (required for system files). - -\b Remove the library if the file is not protected by Windows File Protection. - -NOREBOOT_PROTECTED - -\b Warns the user when the library is in use. The user will have to close applications using the library. - -\b Remove the library if the file is not protected by Windows File Protection. - -REBOOT_NOTPROTECTED - -\b Remove the library on reboot when in use (required for system files). - -\b Remove the library without checking for Windows File Protection. - -NOREBOOT_NOTPROTECTED - -\b Warns the user when the library is in use. The user will have to close applications using the library. - -\b Remove the library without checking for Windows File Protection. - - -\\file\\ - -Location of the library - -\S1{} Options - -\R{define}{Define} any of the following before inserting the UnInstallLib macro to modify its behavior as specified. - -\S2{} LIBRARY_X64 - -\b Uninstalls a DLL built for Windows x64. - -\b \\Warning:\\ this resets \R{setregview}{RegSetView} and file system redirection. - -\S2{} LIBRARY_SHELL_EXTENSION - -\b Define this before inserting UninstallLib macro to call SHChangeNotify with SHCNE_ASSOCCHANGED after unregistration. Use this to refresh the shell when uninstalling a shell extension or when changing file associations. - -\S2{} LIBRARY_COM - -\b Define this before inserting UninstallLib macro to call CoFreeUnusedLibraries after unregistration. Use this for unloading all unnecessary libraries from memory when uninstalling COM libraries. - -\S1{} Example - -\c !insertmacro UnInstallLib REGDLL SHARED REBOOT_NOTPROTECTED $SYSDIR\dllname.dll - - -\H{library_vb6} Visual Basic 6 Runtimes - -Add this code to your script to install and uninstall the VB6 runtimes. - -The correct version of the following files should be stored in your script folder -(or modify the paths to the local files if you want to use another folder): - -\b msvbvm60.dll - -\b oleaut32.dll - -\b olepro32.dll - -\b oleaut32.dll - -\b comcat.dll - -\b asycfilt.dll - -\b stdole2.tlb - -A \W{http://support.microsoft.com/default.aspx?scid=kb;en-us;290887}{Microsoft article} that explains how to obtain these files is available. - -To ask the user for a reboot, if required, use the Modern UI with a Finish page or use \R{ifrebootflag}{IfRebootFlag} and make your own page or message box. - -\c !include Library.nsh -\c -\c Var ALREADY_INSTALLED -\c -\c Section "-Install VB6 runtimes" -\c -\c ;Add code here that sets $ALREADY_INSTALLED to a non-zero value if the application is already installed. For example: -\c -\c IfFileExists "$INSTDIR\MyApp.exe" 0 new_installation ;Replace MyApp.exe with your application filename -\c StrCpy $ALREADY_INSTALLED 1 -\c new_installation: -\c -\c !insertmacro InstallLib REGDLL $ALREADY_INSTALLED REBOOT_NOTPROTECTED "msvbvm60.dll" "$SYSDIR\msvbvm60.dll" "$SYSDIR" -\c !insertmacro InstallLib REGDLL $ALREADY_INSTALLED REBOOT_PROTECTED "oleaut32.dll" "$SYSDIR\oleaut32.dll" "$SYSDIR" -\c !insertmacro InstallLib REGDLL $ALREADY_INSTALLED REBOOT_PROTECTED "olepro32.dll" "$SYSDIR\olepro32.dll" "$SYSDIR" -\c !insertmacro InstallLib REGDLL $ALREADY_INSTALLED REBOOT_PROTECTED "comcat.dll" "$SYSDIR\comcat.dll" "$SYSDIR" -\c !insertmacro InstallLib DLL $ALREADY_INSTALLED REBOOT_PROTECTED "asycfilt.dll" "$SYSDIR\asycfilt.dll" "$SYSDIR" -\c !insertmacro InstallLib TLB $ALREADY_INSTALLED REBOOT_PROTECTED "stdole2.tlb" "$SYSDIR\stdole2.tlb" "$SYSDIR" -\c -\c SectionEnd -\c -\c Section "-un.Uninstall VB6 runtimes" -\c -\c !insertmacro UnInstallLib REGDLL SHARED NOREMOVE "$SYSDIR\msvbvm60.dll" -\c !insertmacro UnInstallLib REGDLL SHARED NOREMOVE "$SYSDIR\oleaut32.dll" -\c !insertmacro UnInstallLib REGDLL SHARED NOREMOVE "$SYSDIR\olepro32.dll" -\c !insertmacro UnInstallLib REGDLL SHARED NOREMOVE "$SYSDIR\comcat.dll" -\c !insertmacro UnInstallLib DLL SHARED NOREMOVE "$SYSDIR\asycfilt.dll" -\c !insertmacro UnInstallLib TLB SHARED NOREMOVE "$SYSDIR\stdole2.tlb" -\c -\c SectionEnd - -You can use similar code to install common VB6 ActiveX controls (such as the controls for Windows Common Controls). +\A{library} DLL/TLB Library Setup + + +\H{library_intro} Introduction + +The Library header file can be used to setup dynamic link libraries (DLL) and type libraries (TLB). +If necessary, the following actions will be performed: + +\b File copying + +\b File copying on reboot + +\b Version checks + +\b Registration and unregistration + +\b Registration and unregistration on reboot + +\b Shared DLL counting + +\b Windows File Protection checks + +The macros are stored in the header file Library.nsh, which should be included in scripts using this system: + +\c !include Library.nsh + +Note that the library macros are limited on non-Windows platforms. DLL version information is required when compiling on non-Windows platforms. + + +\H{library_install} Library Installation + +\S1{} Introduction + +The InstallLib macro allows you to install a library. It sets the error flag if something went wrong during library setup. + +To ask the user for a reboot, if required, use the Modern UI with a Finish page or use \R{ifrebootflag}{IfRebootFlag} and make your own page or message box. + +\S1{} Parameters + +\c libtype shared install localfile destfile tempbasedir + +\\libtype\\ + +The type of the library + +DLL - Dynamic link library (DLL)\\ +REGDLL - DLL that has to be registered\\ +TLB - Type library or DLL that contains a type LIBRARY\\ +REGDLLTLB - DLL that has to be registered and contains a type library\\ + + +\\shared\\ + +Specify whether the library is shared with other applications + +NOTSHARED - The library is not shared\\ +$VARNAME - Variable that is empty when the application is installed for the first time, + which is when the shared library count will be increased.\\ + +\\install\\ + +Specify the installation method + +REBOOT_PROTECTED + +\b Upgrade the library on reboot when in use (required for system files). + +\b Upgrade the library if the file is not protected by Windows File Protection. + +NOREBOOT_PROTECTED + +\b Warns the user when the library is in use. The user will have to close applications using the library. + +\b Upgrade the library if the file is not protected by Windows File Protection. + +REBOOT_NOTPROTECTED + +\b Upgrade the library on reboot when in use (required for system files). + +\b Upgrade the library without checking for Windows File Protection. + +NOREBOOT_NOTPROTECTED + +\b Warns the user when the library is in use. The user will have to close applications using the library. + +\b Upgrade the library without checking for Windows File Protection. + +\\localfile\\ + +Location of the library on the compiler system + +\\destfile\\ + +Location to store the library on the user's system + +\\tempbasedir\\ + +Directory on the user's system to store a temporary file when the system has to be rebooted. + +For Windows 9x/ME support, this directory should be on the same volume as the destination file (destfile). +The Windows temp directory could be located on any volume, so you cannot use this directory. + +\S1{} Options + +\R{define}{Define} any of the following before inserting the InstallLib macro to modify its behavior as specified. + +\S2{} LIBRARY_X64 + +\b Installs a DLL built for Windows x64. + +\b \\Warning:\\ this resets file system redirection. + +\S2{} LIBRARY_SHELL_EXTENSION + +\b Define this before inserting InstallLib macro to call SHChangeNotify with SHCNE_ASSOCCHANGED after registration. + +\b Use this to refresh the shell when installing a shell extension or when changing file associations. + +\S2{} LIBRARY_COM + +\b Define this before inserting InstallLib macro to call CoFreeUnusedLibraries after registration. + +\b Use this for unloading all unnecessary libraries from memory when installing COM libraries. + +\S2{} LIBRARY_IGNORE_VERSION + +\b Define this before inserting InstallLib macro to ignore version information in the file and always install it, even if it already exists. + +\b Use this when an older or specific version is required. + +\b Not recommended for DLLs installed to $SYSDIR. + +\S1{} Notes + +\b If you want to support Windows 9x/ME, you can only use short filenames (8.3). + +\b \\Warning:\\ when deploying DLLs, always use redistributable files. Never copy files from your system directory. + +\S1{} Example + +\S2{} Unshared DLL + +\c !insertmacro InstallLib REGDLL NOTSHARED REBOOT_NOTPROTECTED dllname.dll $SYSDIR\dllname.dll $SYSDIR + +\S2{} Shared DLL + +\c ;Add code here that sets $ALREADY_INSTALLED to a non-zero value if the application is +\c ;already installed. For example: +\c +\c IfFileExists "$INSTDIR\MyApp.exe" 0 new_installation ;Replace MyApp.exe with your application filename +\c StrCpy $ALREADY_INSTALLED 1 +\c new_installation: +\c +\c !insertmacro InstallLib REGDLL $ALREADY_INSTALLED REBOOT_NOTPROTECTED dllname.dll $SYSDIR\dllname.dll $SYSDIR + +\H{library_uninstall} Library Uninstallation + +\S1{} Introduction + +The UnInstallLib macro allows you to uninstall a library. It sets the error flag if something went wrong during library removal. + +\S1{} Parameters + +\c libtype shared uninstall file + +\\libtype\\ + +The type of the library + +DLL - Dynamic link library (DLL)\\ +REGDLL - DLL that has to be registered\\ +TLB - Type library or DLL that contains a type LIBRARY\\ +REGDLLTLB - DLL that has to be registered and contains a type library\\ + + +\\shared\\ + +Specify whether the library is shared with other applications + +NOTSHARED - The library is not shared\\ +SHARED - The library is shared and should be removed if the shared library count + indicates that the file is not in use anymore..\\ + +\\uninstall\\ + +Specify the uninstallation method + +NOREMOVE + +\b The library should not be removed. You should use this option for common or important +system files such as the Visual Basic/C++/MFC runtimes. + +REBOOT_PROTECTED + +\b Remove the library on reboot when in use (required for system files). + +\b Remove the library if the file is not protected by Windows File Protection. + +NOREBOOT_PROTECTED + +\b Warns the user when the library is in use. The user will have to close applications using the library. + +\b Remove the library if the file is not protected by Windows File Protection. + +REBOOT_NOTPROTECTED + +\b Remove the library on reboot when in use (required for system files). + +\b Remove the library without checking for Windows File Protection. + +NOREBOOT_NOTPROTECTED + +\b Warns the user when the library is in use. The user will have to close applications using the library. + +\b Remove the library without checking for Windows File Protection. + + +\\file\\ + +Location of the library + +\S1{} Options + +\R{define}{Define} any of the following before inserting the UnInstallLib macro to modify its behavior as specified. + +\S2{} LIBRARY_X64 + +\b Uninstalls a DLL built for Windows x64. + +\b \\Warning:\\ this resets \R{setregview}{RegSetView} and file system redirection. + +\S2{} LIBRARY_SHELL_EXTENSION + +\b Define this before inserting UninstallLib macro to call SHChangeNotify with SHCNE_ASSOCCHANGED after unregistration. Use this to refresh the shell when uninstalling a shell extension or when changing file associations. + +\S2{} LIBRARY_COM + +\b Define this before inserting UninstallLib macro to call CoFreeUnusedLibraries after unregistration. Use this for unloading all unnecessary libraries from memory when uninstalling COM libraries. + +\S1{} Example + +\c !insertmacro UnInstallLib REGDLL SHARED REBOOT_NOTPROTECTED $SYSDIR\dllname.dll + + +\H{library_vb6} Visual Basic 6 Run-Time Files + +A new VB6.nsh header file is available for the setup of the VB6 run-time files. +To obtain the latest run-time files, download \W{http://nsis.sourceforge.net/vb6runtime.zip} and extract this file. + +\c !include VB6RunTime.nsh +\c +\c Var AlreadyInstalled +\c +\c Section "-Install VB6 run-time files" +\c +\c ;Add code here that sets $AlreadyInstalled to a non-zero value if the application is already installed. For example: +\c IfFileExists "$INSTDIR\MyApp.exe" 0 new_installation ;Replace MyApp.exe with your application filename +\c StrCpy $AlreadyInstalled 1 +\c new_installation: +\c +\c !insertmacro VB6RunTimeInstall C:\vb6runtimes $AlreadyInstalled ;Replace C:\vb6runtimes with the location of the files +\c +\c SectionEnd +\c +\c Section "-un.Uninstall VB6 run-time files" +\c +\c !insertmacro VB6RunTimeUnInstall +\c +\c SectionEnd + +Remarks: + +\b You may have to install additional files for such Visual Basic application to work, such as OCX files for user interface controls. + +\b Installation of the run-time files requires Administrator or Power User privileges. Use the Multi-User header file to verify whether these privileges are available. + +\b Add a Modern UI finish page or another check (see \R{ifrebootflag}{IfRebootFlag}) to allow the user to restart the computer when necessary. diff --git a/Examples/makensis.nsi b/Examples/makensis.nsi index 78708078..353ddbe4 100644 --- a/Examples/makensis.nsi +++ b/Examples/makensis.nsi @@ -154,6 +154,7 @@ ${MementoSection} "NSIS Core Files (required)" SecCore File ..\Include\LangFile.nsh File ..\Include\InstallOptions.nsh File ..\Include\MultiUser.nsh + File ..\Include\VB6RunTime.nsh SetOutPath $INSTDIR\Docs\StrFunc File ..\Docs\StrFunc\StrFunc.txt diff --git a/Include/SConscript b/Include/SConscript index f71ab9e0..851bc416 100644 --- a/Include/SConscript +++ b/Include/SConscript @@ -1,23 +1,24 @@ -includes = Split(""" - Colors.nsh - FileFunc.nsh - LangFile.nsh - Library.nsh - LogicLib.nsh - Memento.nsh - MUI.nsh - MUI2.nsh - Sections.nsh - StrFunc.nsh - TextFunc.nsh - UpgradeDLL.nsh - WinMessages.nsh - WinVer.nsh - WordFunc.nsh - x64.nsh -""") - -Import('env') - -env.DistributeInclude(includes) -env.DistributeDocs('StrFunc.txt', path='StrFunc') +includes = Split(""" + Colors.nsh + FileFunc.nsh + LangFile.nsh + Library.nsh + LogicLib.nsh + Memento.nsh + MUI.nsh + MUI2.nsh + Sections.nsh + StrFunc.nsh + TextFunc.nsh + UpgradeDLL.nsh + VB6RunTime.nsh + WinMessages.nsh + WinVer.nsh + WordFunc.nsh + x64.nsh +""") + +Import('env') + +env.DistributeInclude(includes) +env.DistributeDocs('StrFunc.txt', path='StrFunc') diff --git a/Include/VB6RunTime.nsh b/Include/VB6RunTime.nsh new file mode 100644 index 00000000..498faf08 --- /dev/null +++ b/Include/VB6RunTime.nsh @@ -0,0 +1,90 @@ +/* + +VB6RunTime.nsh + +Setup of Visual Basic 6.0 run-time files, including the Oleaut32.dll security update + +Copyright © 2008 Joost Verburg + +To obtain the run-time files, download and extract +http://nsis.sourceforge.net/vb6runtime.zip + +Script code for installation: + +!insertmacro InstallVB6RunTime FOLDER ALREADY_INSTALLED + +in which FOLDER is the location of the run-time files and ALREADY_INSTALLED is the +name of a variable that is empty when the application is installed for the first time +and non-empty otherwise + +Script code for uninstallation: + +!insertmacro UnInstallVB6RunTime + +Remarks: + +* You may have to install additional files for such Visual Basic application to work, + such as OCX files for user interface controls. + +* Installation of the run-time files requires Administrator or Power User privileges. + Use the Multi-User header file to verify whether these privileges are available. + +* Add a Modern UI finish page or another check (see IfRebootFlag in the NSIS Users + Manual) to allow the user to restart the computer when necessary. + +*/ + +!ifndef VB6_INCLUDED +!define VB6_INCLUDED +!verbose push +!verbose 3 + +!include Library.nsh +!include WinVer.nsh + +!macro VB6RunTimeInstall FOLDER ALREADY_INSTALLED + + !insertmacro InstallLib REGDLL "${ALREADY_INSTALLED}" REBOOT_NOTPROTECTED "${FOLDER}\msvbvm60.dll" "$SYSDIR\msvbvm60.dll" "$SYSDIR" + + ;The files below will only be installed on Win9x/NT4 + + !insertmacro InstallLib REGDLL "${ALREADY_INSTALLED}" REBOOT_PROTECTED "${FOLDER}\olepro32.dll" "$SYSDIR\olepro32.dll" "$SYSDIR" + !insertmacro InstallLib REGDLL "${ALREADY_INSTALLED}" REBOOT_PROTECTED "${FOLDER}\comcat.dll" "$SYSDIR\comcat.dll" "$SYSDIR" + !insertmacro InstallLib DLL "${ALREADY_INSTALLED}" REBOOT_PROTECTED "${FOLDER}\asycfilt.dll" "$SYSDIR\asycfilt.dll" "$SYSDIR" + !insertmacro InstallLib TLB "${ALREADY_INSTALLED}" REBOOT_PROTECTED "${FOLDER}\stdole2.tlb" "$SYSDIR\stdole2.tlb" "$SYSDIR" + + Push $R0 + + ${if} ${IsNT} + ${if} ${IsWinNT4} + ReadRegStr $R0 HKLM "System\CurrentControlSet\Control" "ProductOptions" + ${if} $R0 == "Terminal Server" + !insertmacro InstallLib REGDLL "${ALREADY_INSTALLED}" REBOOT_NOTPROTECTED "${FOLDER}\NT4TS\oleaut32.dll" "$SYSDIR\oleaut32.dll" "$SYSDIR" + ${else} + !insertmacro InstallLib REGDLL "${ALREADY_INSTALLED}" REBOOT_NOTPROTECTED "${FOLDER}\NT4\oleaut32.dll" "$SYSDIR\oleaut32.dll" "$SYSDIR" + ${endif} + ${endif} + ${else} + ;No Oleaut32.dll with the security update has been released for Windows 9x. + ;The NT4 version is used because NT4 and Win9x used to share the same 2.40 version + ;and version 2.40.4519.0 is reported to work fine on Win9x. + !insertmacro InstallLib REGDLL "${ALREADY_INSTALLED}" REBOOT_NOTPROTECTED "${FOLDER}\NT4\oleaut32.dll" "$SYSDIR\oleaut32.dll" "$SYSDIR" + ${endif} + + Pop $R0 + +!macroend + +!macro VB6RunTimeUnInstall + + !insertmacro UnInstallLib REGDLL SHARED NOREMOVE "$SYSDIR\msvbvm60.dll" + !insertmacro UnInstallLib REGDLL SHARED NOREMOVE "$SYSDIR\oleaut32.dll" + !insertmacro UnInstallLib REGDLL SHARED NOREMOVE "$SYSDIR\olepro32.dll" + !insertmacro UnInstallLib REGDLL SHARED NOREMOVE "$SYSDIR\comcat.dll" + !insertmacro UnInstallLib DLL SHARED NOREMOVE "$SYSDIR\asycfilt.dll" + !insertmacro UnInstallLib TLB SHARED NOREMOVE "$SYSDIR\stdole2.tlb" + +!macroend + +!verbose pop +!endif